Posted by Bill S on October 28, 2001 at 14:18:11:
In Reply to: bevel gear posted by shabbir on October 26, 2001 at 23:19:44:
These are settings for a 3" Gleason,
Assuming a 24T miter gear (1:1 or 24T/24T):
Root angle: 41 d 6 m
Pitch angle: 45 d 0 m
Face angle: 48 d 22 m
tooth angle
for 14.5 PA: 3 d 40 m
for 20 PA: 4 d 4 m
For 32 NDP
Addendum: 0.0312
dedendum: 0.0371
Full Depth: 0.0683
Hope this helps
Bill S